Rubber Strainer Machine
Applications
A rubber strainer machine is used to screen out impurities found within rubber.
Parameters
| Model | |
| Screw diameter (mm) | 150 |
| Length/Diameter | 1:5.14 |
| Screw rotating speed (r/min) | 53 |
| Motor power (KW) | 37 |
| Vapor pressure (MPa) | 0.6-0.8 |
| Cooling water pressure (MPa) | 0.2 |
| Production capacity (㎏/h) | 450 |
| Weight (T) | ~4.5 |
| Model | |
| Screw diameter (mm) | 200 |
| Length/Diameter | 4.5:1 |
| Screw rotating speed (r/min) | 45 |
| Motor power (KW) | 55 |
| Vapor pressure (MPa) | 0.6-0.8 |
| Cooling water pressure (MPa) | 0.2 |
| Production capacity (㎏/h) | 900 |
| Weight (T) | ~8 |
| Model | |
| Screw diameter (mm) | 250 |
| Length/Diameter | 4:1 |
| Screw rotating speed (r/min) | 40 |
| Motor power (KW) | 110 |
| Vapor pressure (MPa) | 0.6-0.8 |
| Cooling water pressure (MPa) | 0.2 |
| Production capacity (㎏/h) | 1800 |
| Weight (T) | ~9 |
Description of Rubber Strainer Machine
- The strainer machine’s screw uses 38CrMoAIA materials that have undergone a tempering and surface nitriding treatment. The surface hardness is HRC60-65 and hard layer thickness is 0.4-0.6mm. The surface roughness is less than Ra0.8. Inside the screw, there is a pore path for temperature control circulating water, which serves for the heating and cooling of screw.
- The feeding cylinder is mainly composed of a rear body, front bushing and rear bushing. The structure is a jacketed cast iron.
The rear body is made of cast steel and contains a cavity where temperature control circulating water can flow through for the heating and cooling of the rear body.
The front & rear bushing uses 38CrMoAIA materials that have undergone a tempering and surface nitriding treatment.
Get in Touch
